,

Owie-Gum Stick XR/Pint

(4 customer reviews)

$50.00

Unlock Your boards potential! Removes BMS serialization and makes any XR™ or Pint™ accept any battery or BMS
Fix in app battery % reading!
There are other causes for error 16 that this is unable to fix such as BMS damage or broken wire harness.

SKU: 123 Categories: ,

DOES NOT WORK ON HAPTICK BUZZ FIRMWARE.

PINT version comes with 2 Sided tape *not shown*

“XR” version works in Pint or XR Battery box.

Includes Money back 30-day guarantee*

Features

  • Plug and play no soldering required on pint™ minimal soldering for XR™
  • Unlocks battery expansion capabilities on Pint™ and XR™.
  • Displays correct battery percentage in the official Onewheel™ app.
  • Defeats BMS <-> Controller pairing and allows you to use any Pint™ or XR™ BMS in your board.
  • Shows various stats about your battery on a web page through Wi-Fi – Voltage, current, individual cell voltages and more.
  • Supports future firmware updates via Wi-Fi – no need to reopen your board.
  • Adds password protection to your board
  • software from Owie

*Shipping not included, must be installed per installation instructions, does not cover forgotten Wi-Fi passwords, must ship back at own expense.

We are in no way affiliated with Future Motion Inc. Onewheel™, Onewheel XR™, Onewheel Pint™, Onewheel Plus™, etc are registered trademarks of Future Motion Inc. Installation of our mod will void your FM™ warranty. By purchasing our mod you are assuming all liability and risk.

Weight .02 oz
Dimensions 5 × 5 × 1 in
Type

XR, Pint

4 reviews for Owie-Gum Stick XR/Pint

  1. rgmark (verified owner)

    This little Gem/Gum was so easy to install. Very little soldering and even less steps to get it working. The best news of all — it works on a 4213 XR with firmware 4162 (OWIE was v1.4.3). I think the price is right where it should be for the time saved and how it is packaged. Remember, time is money and this definitely saves you some time. Don’t hesitate, purchase today!

  2. Wesley Rivera

    The chip works perfectly, super easy install and all my questions were answered quickly by emailing Marcello.

  3. Keith Dwyer (verified owner)

    I was very nervous when purchasing the chip because I have ZERO experience with micro chips or soldering. The instructions seemed simple enough though, and I have seen plenty of others install the chip without much experience, so I decided to give it a go.
    I had to contact customer service directly for some questions, and they were EXTREMELY HELPFUL! They helped me with everything I needed! I highly recommend this chip and this company. I soldered the chip into my onewheel XR, with an upgraded CBXR battery. That same night I rode the board for 24 miles 🙏 thank you for everything AvaSpark!

  4. Andy (verified owner)

    I have two onewheel xr 4212 and With this mod I am able to increase range. Easy to install ,

Add a review

Your email address will not be published. Required fields are marked *

Shopping Cart